Usado Tornos Cnc

HR 35

Characteristics: HR 35 | I turn over the bench: 34.6″ | Turning on the cross slide: 25.2″ | I turn over the neckline: 46″ | Width of the bed: 19″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″). | Cross t...

HW 30

Characteristics: HW 30 | I turn over the bench: 30 ″ | Turning on the cross slide: 21.3″ | I turn over the neckline: 38.9″ | Width of the bed: 15.75″ | Distance between points: 80″ (O 120″ / 160″) | Cross travel:...

ML 1740T

RML 1640T

Characteristics: RML 1640T | I turn over the bench: 16-3/16″ | Turning on the cross slide: 10-3/8″ | I turn over the neckline: 23″ | Width of the bed: 10-1/4″ | Distance between points: 40″ | Cross travel: 8-11/1...

SSM 1340BV

Characteristics: SSM 1340BV | I turn over the bench: 13″ | Turning on the cross slide: 8-1/4″ | I turn over the neckline: 18-1/2″ | Width of the bed: 7 - 1/2″ | Distance between points: 40″ | Cross travel: 6-3/4″...

KLS 1840G

Characteristics: KLS 1840G | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.2″ | Width of the bed: 12 ″ | Distance between points: 40″ | Cross travel: 11.4″ | Auxili...

KLS 1340A

Characteristics: KLS 1340A | I turn over the bench: 13″ | Turning on the cross slide: 7-1/4″ | I turn over the neckline: 18-3/4″ | Width of the bed: 7 - 3/8″ | Distance between points: 40″ | Cross travel: 6 - 1/2...

KLM 300LY

Características: KLM 300LY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 | Longitud máxima de giro: 44.8 | Husillo agujero pasante: 2,95 | Chuck: 10

KLM 300SY

Características: KLM 300SY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 / 14.8 | Longitud máxima de giro: 24.2 / 24.2 | Husillo agujero pasante: 2,95 | Chuck: 10

KVT 75E

Características: KVT 75E | Diámetro máximo de giro: 29.5 | Longitud máxima de giro: 23.6 | Diámetro máximo de vuelco: 33.4 | Nariz del husillo: A2-11

KLR 360

Características: KLR 360 | Diámetro máximo de giro: 19.7 | Longitud máxima de giro: 44.5/64/84/118 | Husillo agujero pasante: 3.97 | Chuck: 12

CTL 618EVS

• Taladro del eje: 25.4 millimeter

Characteristics: CTL 618EVS | I turn over the bench: 11″ | Turning on the cross slide: 6″ | I turn over the neckline: 9″ | Width of the bed: 6 - 3/4″ | Distance between points: 18″ | Cross travel: 6″ | Auxiliary ...

KLS 1860G

Characteristics: KLS 1860G | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.2″ | Width of the bed: 12 ″ | Distance between points: 60″ | Cross travel: 11.4″ | Auxili...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...