Usado Máquina Herramienta en Lisboa, Portugal

Mecânica Exacta

Línea de corte y plegado de chapa Gasparini

• Fabricante: Gasparini

Drilling machine Compair Holman Voltrak wagon drill

• Fabricante: CompAir

Atlas Copco's Odex System

• Fabricante: Atlas-Copco

MHS 350

• Fabricante: MHS

- operating weight (kg): 320 | - impact frequency (p.p.m.): 500 - 750 | - impact energy (j): 1020 | - flow rate (l / min): 45 - 68 | - pressure (bar): 117 | - machine weight (ton.): 4 - 8 | - guide diameter (mm):...

REWINDING MACHINE ACCESSORIES

SFERE PACK 50.40 VF

• Fabricante: SFERE

Total length: 2470 mm | Width: 1000 mm | Total height: 1,450 mm | Feeding ground height: 900mm | Weight: 360 kg | Fence frame: 390mm cross arm | The noise level: 60 dB | Voltage: 220 ~ 230 V + single phase + Eart...

Kaltenbach HDM 1300

• Fabricante: Kaltenbach
• Modelo: HDM 1300

Mitering (manual / powered): powered at 20 degrees | Main saw motor: 14/20 H.P. | Voltage: 480/3/60 | Hydraulic pump motor: 4 H.P. | Dimensions: 10’6 “L x 4’4” W x 8’8 “H� Saw only | Weight: about 7,065 kg | Saw ...

CEVISA CHP-12

• Fabricante: Cevisa
• Modelo: CHP-12

Cv: 3 | Rpm: 1.400 | Materials, in a single run, w: 12 mm. | Minimum plate thickness: 6 mm. | Maximum plate thickness: 40 mm. | Bevelling length per minute: 2.6 m. | Minimum plate width: 55mm | Machine net weight...

GENSET MOTO WELDING

• Fabricante: GENSET

Max kva at 380 ~ 400 volts: 7 KVA