Usado tester en Nagano, Japón

CLAMP ON ADAPTER 9290-10

• Fabricante: HIOKI E.E

Rated primary current: AC 1000 A continued (Maximum 1500 A for 5 minutes or shorter) | Rated secondary current: AC 100 A (10 : 1 CT ratio) | Amplitude accuracy: ±1.5% rdg. | Phase accuracy: ±1.0° or less | Freque...

DIGITAL PHASE DETECTOR PD3259-50

• Fabricante: HIOKI E.E

Detection functions: Positive phase, negative phase (Three-phase 3-wire, Three-phase 4-wire), open phase, prediction of ground phase (Three-phase 3-wire) | Measurement parameters: Three-phase AC voltage (line-to...

POWER METER PW3335

Measurement lines: Single-phase/ two-wires | Measurement items: Voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency, maximum current ratio, current integration, ac...

CURRENT PROBE CT6710

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7.0 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal 1...

CURRENT PROBE CT6711

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 120 MHz (-3 dB) | Rise time: 2.9 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal ...

CLAMP ON PROBE 3273-50

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max. a...

CLAMP ON PROBE 3276

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 100 MHz (-3 dB) | Rise time: 3.5 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max...

CLAMP ON PROBE 3275

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 2 MHz (-3 dB) | Rise time: 175 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 500 A rms (requires derating at frequency) | Max. ...

STANDARD RESISTOR SR-2

Voltaje máximo: 1000 V CC | Valor del resistor: de 1 M a 10.000 MΩ en 24 puntos | Dimensiones: 270 mm (10.63 in) An × 90 mm (3.54 in) Alto × 195 mm (7.68 in) Prof.

DMM STATION MR8990+MR8741/MR8740

Measurement functions: Install into Memory HiCorder MR8740/8741 for use; 2 channels of DC voltage measurement | Measurement ranges (20 div. f.s.): 100 mV range (5 mV/div.): -120.0000 mV to 120.0000mV, 0.1 μV reso...

RESISTANCE METER RM3545

Resistance range: 10 mΩ (12.00000 mΩ display Max., 10 nΩ resolution) to 1000 MΩ range (1200.0 MΩ display Max., 100 kΩ resolution), 12 steps [LP ON] 1000 mΩ (1200.00 mΩ display Max., 10 µΩ resolution) to 1000 Ω ra...

HUMIDITY LOGGER LR5001

• Fabricante: HIOKI E.E

Measurement items: Temperature 1 ch and Humidity 1 ch (Requires included or optional humidity sensor) | Measurement range: Temperature: -40.0°C to 85.0°C, Humidity: 0 to 100% RH at sensor environment | Basic acc...

INSTRUMENTATION LOGGER LR5031

• Fabricante: HIOKI E.E

Measurement items: DC current (1 ch), for Instrumentation | Measurement range: -30.00 to 30.00 mA | Accuracy: ±0.5 %rdg. ±5 dgt. | Storage capacity: Instantaneous value mode: 60,000 data, Statistical value mode: ...

LCR METER IM3536

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) | Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls,...

C HiTESTER 3504

Measurement parameters: C (capacitance), D (loss coefficient tan δ) | Measurement range: C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99999 | Basic accuracy: (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016 | Measur...