Usado tester en Nagano, Japón

FLYING PROBE TESTER FA1813

Número de brazos: 4 (2 de cada, arriba y abajo) | Sondas montables: serie 1172, serie 1072, serie 1073 | Número de pasos de la prueba: Máx. 999.999 pasos | Alcance del juicio: -99,9% a +999,9% o valor absoluto | ...

FLYING PROBE TESTER FA1816

Número de brazos: 2 (superficie superior × 2) | Sondas compatibles: Serie 1172, serie CP1072 | Número de pasos de la prueba: 999.999 pasos | Parámetros de ensayo e intervalos de medición: Medición de la resistenc...

SMD TEST FIXTURE IM9110

Connection with sample: 2-terminal connection from opposite sides | Measurable sample sizes: 0.25 ±20% × 0.125 ±10% × 0.125 ±10% mm (EIA size category: 008004 inch) Please contact Hioki for information about othe...

EARTH TESTER FT6031-50

• Fabricante: HIOKI E.E

Measurement system: Two-electrode method/three-electrode method (switchable) | Measurement range: 20 Ω (0 Ω〜20.00 Ω) | Accuracy: ±1.5% rdg ±8 dgt | Earth voltage: 0〜30.0 V rms Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60...

ANALOG EARTH TESTER FT3151

• Fabricante: HIOKI E.E

Measurement system: AC potentiometer method, Three-electrode method/ two-electrode method (switchable) Measuring frequency: 575 Hz/ 600 Hz Measurement current: Three-electrode method: 15 mA rms or less; Two-elect...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

ANALOG MΩ HiTESTER IR4016

• Fabricante: HIOKI E.E

Rated output voltage: 500 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 0.1 M to 50 MΩ | Lower limit resistance: 0.5 MΩ (measurement resistance v...

ANALOG MΩ HiTESTER IR4018

• Fabricante: HIOKI E.E

Rated output voltage: 1000 V DC | Effective maximum indicated value: 2000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 2 M to 1000 MΩ | Lower limit resistance: 1 MΩ (measurement resistance v...

ANALOG MΩ HiTESTER IR4017

• Fabricante: HIOKI E.E

Rated output voltage: 500 V DC | Effective maximum indicated value: 1000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 1 M to 500 MΩ | Lower limit resistance: 0.5 MΩ (measurement resistance v...

AC AUTOMATIC INSULATION/WITHSTANDING HiTESTER 3174

Testing voltage: 500 V DC, 1000 V DC | Voltage setting: Digital setting, Setting resolution: 0.01 kV | Waveform/frequency: Sine wave (Distortion ratio 5 % or less at no load), 50/60 Hz selectable | Current measur...

CLAMP ON EARTH TESTER FT6380-50

• Fabricante: HIOKI E.E

Measurement principle: Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi groun...

ANALOG MΩ HiTESTER 3490

• Fabricante: HIOKI E.E

Rated output voltage: 250 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length 0.05 to 50 MΩ | Lower limit resistance: 0.25 MΩ | Overload protection: 660...

HIGH VOLTAGE SCANNER 3930

Operation modes: Multi-mode: Scanning of user-selected points for high 4 ch / low 4 ch Single mode: Common scan of high 8 ch - common | Rated voltage used: 5 kV AC / 5 kV DC | Operation indications: Lamps light u...

DIGITAL MULTIMETER DT4223

Dc voltage range: 600.0 mV to 600.0 V, 4 ranges, Basic accuracy: ±0.5 % rdg. ±5 dgt. | Ac voltage range: 6.000 V to 600.0 V, 3 ranges, Frequency characteristics: 40 Hz - 1 kHz Basic accuracy 40 - 500 Hz : ±1.0 % ...

DIGITAL MULTIMETER DT4224

Dc voltage range: 600.0 mV to 600.0 V, 4 ranges, Basic accuracy: ±0.5 % rdg. ±5 dgt. | Ac voltage range: 6.000 V to 600.0 V, 3 ranges, Frequency characteristics: 40 Hz - 1 kHz Basic accuracy 40 - 500 Hz : ±1.0 % ...