Usado tester en Nagano, Japón

DATA COLLECTOR LR5092

• Fabricante: HIOKI E.E

Function: • Settings: Communicates via infrared light with LR5000 series loggers to send and receive settings. • Graph function: Displays graphs of up to 16 channels, displays statistical data, etc. • Print funct...

CLAMP LOGGER LR5051

• Fabricante: HIOKI E.E

Measurement items: AC Current 2 channels (used with the optional current sensor; load current 2ch, leak current 2ch, or load/leak each 1ch) Caution: Current and leak current that occur intermittently cannot be me...

TEMPERATURE LOGGER LR5011

• Fabricante: HIOKI E.E

Measurement items: Temperature 1ch (with optional sensor) | Measurement range: -40.0°C to 180.0°C Depends on measurement range of sensor | Basic accuracy: ±0.5°C (main unit + sensor accuracy, at 0.0 to 35.0°C) N...

EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000

Three-element model: Equivalent circuit model: Four models for Coil, Resistance, Capacitor Measurement items: L1 (Inductance), C1 (Capacitance), R1 (Resistance), Qm (Resonance sharpness), fr (Resonance frequency...

DIFFERENTIAL PROBE P9000

• Fabricante: HIOKI E.E

Measurement functions: Waveform monitor output only Frequency characteristics: DC to 100 kHz, -3 dB | Division ratio: 1000:1 or 100:1 (user selectable) | Dc amplitude accuracy: ±0.5% f.s. (f.s. = 1.0 V; voltage d...

LOGIC PROBE 9320-01

• Fabricante: HIOKI E.E

Function: Detection of voltage signal or relay contact signal for High/Low state recording | Input: 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detec...

DIFFERENTIAL PROBE 9322

• Fabricante: HIOKI E.E

Measurement functions: DC mode: Waveform monitor output, DC to 10 MHz ±3 dB AC mode: Detection of power line surge noise, 1 kHz to 10 MHz ±3 dB (Low frequency cut-off frequency 1 kHz ± 300 Hz) RMS mode: Rectifie...

LOGIC PROBE 9327

• Fabricante: HIOKI E.E

Function: Detection of voltage signal or relay contact signal for High/Low state recording | Input: 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detec...

MEMORY HiCORDER MR6000

• Fabricante: HIOKI E.E
• Número de canales: 2 сhannels

Additional function: N/A | Number of input units: Max. 8 units | Number of channels: Max. 32 analog channels (when using the U8975), or 128 logic channels (when using the 8973) | Measurement ranges (20 div full-s...

BATTERY INSULATION TESTER BT5525

• Fabricante: HIOKI E.E

Main functions: Insulation resistance test Break Down Detect function (BDD) Contact check function | Output specifications: Output voltage : 25 V to 500 V, Setting resolution 1 V Charging current (Current limit ...

PRECISION DC VOLTMETER DM7276

Dc voltage: 100 mV ( ±120.000 00 mV) to 1000 V ( ±1000.000 0 V ), 5 ranges | Basic accuracy: 10 V range: ±0.0009% rdg. ±12 μV | Temperature: -10.0°C to 60.0°C (14.0°F to 140°F), combined with sensor Z2001: ±0.5°C...

PRECISION DC VOLTMETER DM7275

Dc voltage: 100 mV ( ±120.000 00 mV) to 1000 V ( ±1000.000 0 V ), 5 ranges | Basic accuracy: 10 V range: ±0.0020% rdg. ±12 μV | Temperature: -10.0°C to 60.0°C (14.0°F to 140°F), combined with sensor Z2001: ±0.5°C...

PRECISION BATTERY TESTER BT6065, BT6075

Resistance measurement ranges (high resolution on): [Range (Measurement current), Accuracy (SLOW2), Maximum display value, Resolution] 3 mΩ (300 mA), ±0.08% rdg. ±0.08 μΩ, 5.10000 mΩ, 0.01 μΩ 3 mΩ (100 mA), ±0.08...

SWITCH MAINFRAME SW1001

Slots: 3 slots | Supported modules: MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair) | Connectible instruments: Max. 2 units 2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-termina...

SWITCH MAINFRAME SW1002

Slots: 12 slots | Supported modules: MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair) | Connectible instruments: Max. 2 units 2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-termin...