Building Filters

Usado tester en Tokio, Japón

Yamato DH1032
- Fabricante: Yamato
System: Forced air circulation and ventilation | Operating temp. range: Room temp. +15°C~300°C | Temperature fluctuation: 3.0°C (at 300°C) | Temperature slope: 18°C (at 300°C) | Temperature controller: PID contro...
Tokio, Japón
Yamato DF832
- Fabricante: Yamato
Fan motor: Axial flow fan (capacitor motor: 20W) | Cable port: I.D. ø30mm (rear) | Heat insulator: Glass wool | Other additional structure: Exhaust damper (manual operation) | Safety device: Self-diagnostic funct...
Tokio, Japón
Yamato DF1032
- Fabricante: Yamato
Fan motor: Axial flow fan (capacitor motor: 20W), Two motors used for Model 1032 | Cable port: I.D. ø30mm (rear) | Heat insulator: Glass wool | Other additional structure: Exhaust damper (manual operation) | Safe...
Tokio, Japón
Yamato GAS410
- Fabricante: Yamato
- Modelo: GAS410
Solvent recovery system: Capacitor + freezer | Circulating gas: N2 gas (sealed circulation when connected to ADL311SA or GB-210A) | Circulating volume flow: 0.12 to 0.65m3/min | Compressor (for spraying): Linear ...
Tokio, Japón
Yamato DL410
- Fabricante: Yamato
- Modelo: DL410
Water evaporation rate: Max. approx. 3,000 ml/h | Temperature control range: 40°C - 300°C at inlet | Dry air flow rate: 0.3 - 1.0 m³/min | Spraying system: Two-way nozzle (Dia. of orifice: 0.7mm) Nozzle No.3 stan...
Tokio, Japón
Yamato WGH201
- Fabricante: Yamato
Water quality of distilled water: Normal water: JIS K 0557 A4 After manual refreshing: ASTM D1193 Type1 | Water quality of deionized water: JIS K0557 A4 | Collection of of distilled water: Pretreatment Cartrid...
Tokio, Japón
Yamato PM100
- Fabricante: Yamato
Plasma source: Low frequency high voltage power supply | Gas flow meter: For Oxygen: Flow volume 30～300mL/min | External dimensions: 310W × 300D × 448H mm (without projection) | Vacuum pump connection port: Vacuu...
Tokio, Japón
Yamato ADL311-A
- Fabricante: Yamato
Temp. adjusting unit setting range: 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1deg.C | Drying air amount adjusting range: 0〜0.7m3/mi...
Tokio, Japón
Yamato MH800
- Fabricante: Yamato
Material de la placa: Aluminio con recubrimiento cerámico | Capacidad de agitación: 200 a 10000 ml | Velocidad de agitación: 100 a 1400 rpm | Calentador: 1000W | Control temp.: Tipo de control de entrada Triac | ...
Tokio, Japón
Yamato MH301
- Fabricante: Yamato
Plate material: Aluminum with ceramic coating | Stirring capacity: 100 to 3000ml | Stirring rate: 150 to 1300rpm | Heater: 400W | Temp. control: Triac input control type | Hot plate temp.: Max.300°C (Set by volum...
Tokio, Japón
Yamato TS310
- Fabricante: Yamato
Temp. setting range: 0deg.C to 500deg.C | Temp. display range: -200deg.C to 1300deg.C | Temp. detection accuracy: ±1deg.C | Power breaking capacity: AC100V 50/60 Hz 30A AC200V 50/60 Hz 30A AC200V 3-phase 50/60 Hz...
Tokio, Japón
Yamato BZ300
- Fabricante: Yamato
Material: Placa de acero inoxidable | Temperatura usable: Temperatura ambiente a +200 °C | Dimensiones internas (an×pr×al mm): 300×500×200mm | Observaciones(dimensions): Capacidad 27L | Peso: 2kg
Tokio, Japón
Yamato BY100
- Fabricante: Yamato
Material: Polipropileno | Temperatura usable: -5 a +80 °C | Dimensiones internas (an×pr×al mm): 327×185×156mm | Observaciones(dimensions): Capacidad 8L | Peso: 1kg
Tokio, Japón
Yamato BX100D
- Fabricante: Yamato
Material: Acrílico | Temperatura usable: ≦ 50 °C (solo agua) | Dimensiones internas (an×pr×al mm): 240×300×200mm | Observaciones(dimensions): Capacidad 13L | Peso: 2kg
Tokio, Japón
Yamato BOA311
- Fabricante: Yamato
Temperature control range: RT+10~270°C | Temp. control accuracy: ± 0.1 ℃ (at 200 ℃ Silicone Oil JTM K05) | Temp. fluctuation: 0.2 ℃ (at200 ℃ Silicone Oil JIS) | Temp. distribution accuracy: ± 0.2 ℃ (at 200 ℃ Sili...
Tokio, Japón