Usado en Nagano, Japón

POWER QUALITY ANALYZER PQ3100

Measurement line type: Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel CH4 for voltage/current, (all channels AC/DC measurement) | Voltage ranges: V...

CLAMP ON PROBE 3274

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 10 MHz (-3 dB) | Rise time: 35 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 150 A rms (requires derating at frequency) | Max. ...

POWER METER PW3335

Measurement lines: Single-phase/ two-wires | Measurement items: Voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency, maximum current ratio, current integration, ac...

CURRENT PROBE CT6710

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7.0 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal 1...

CURRENT PROBE CT6711

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 120 MHz (-3 dB) | Rise time: 2.9 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal ...

CLAMP ON PROBE 3273-50

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max. a...

CLAMP ON PROBE 3276

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 100 MHz (-3 dB) | Rise time: 3.5 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max...

CLAMP ON PROBE 3275

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 2 MHz (-3 dB) | Rise time: 175 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 500 A rms (requires derating at frequency) | Max. ...

POWER QUALITY ANALYZER PQ3198

Measurement line type: Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel for voltage, current, power measurement (AC or DC measurement) | Voltage rang...

CURRENT PROBE CT6701

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 120 MHz (-3 dB) | Rise time: 2.9 ns or shorter | Noise level: 60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) | Continuous allowable input: 5 A rms (DC, and sine...

CURRENT PROBE CT6700

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7.0 ns or shorter | Noise level: 60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) | Continuous allowable input: 5 A rms (DC, and sine ...

SUPER MEGOHM METER SM7120

Number of channels: 1 ch | Dc current measurement: 20 pA range (0.1 fA resolution), Accuracy: ±(2.0 % of rdg. +30 dgt.) 200 pA range (1.0 fA resolution), Accuracy: ±(1.0 % of rdg. +30 dgt.) 2 nA range (10 fA re...

PLATE SAMPLE ELECTRODE SME-8310

Dimensiones: 215 mm (8,46 pulgadas) de ancho × 78 mm (3,07 pulgadas) de alto × 165 mm (6,50 pulgadas) de profundidad | Longitud de la punta: 75 cm (2.46 ft)

POWER SOURCE UNIT SM7860

Supported device: Super MΩ HiTester SM7810 Object to which voltage is applied: MLCC (the Multilayer Ceramic Capacitor) | Generation accuracy: Output voltage accuracy: ±2% of set value ± 0.5 V (with no load) Inter...

DISCHARGE DETECTION UPGRADE ST9000

• Fabricante: HIOKI E.E

Funciones de medición: Determinar la descarga | Modelos compatibles: ST4030A